Azbil F7M, Руководство пользователя

Страница: 42 / 58

3-16
Chapter 3. HOW TO USE THE LOADER
„ „ How to write monitoring parameters to the device immediately
Only when monitoring is in progress, parameters with the [Write] button can be
written to the device immediately.
(1) Connect the loader to the device. (
3 - 2 Connecting the Loader to the
Device (P. 3-3)
)
(2) Obtain device information by executing steps 1 to 4 in „ Checking
parameters of the connected device (P. 3-8) . If you have already executed
steps 1 to 4, this process is unnecessary.
(3) Click the
[Monitor]
tab and select the desired item in the tree view. At this
point monitoring information has not yet been read from the device.
[Write]
buttons are disabled and the monitoring parameters cannot be written to the
device immediately.
(The following figure shows the screen after clicking
[Monitor]
→
[Fluid
settings correction]
.)
(4) Click the [Monitor] → [Start monitoring] on the menu bar, or click the
button on the toolbar.
>> The following screen is displayed.
3 - 6 Immediate Writing of Parameters