103
Administrator Guide – AzaCall200 VOIP Multi-Protocol Gateway
(Please note that old configurations may not be erased in this manner. If user
wants to erase old configuration files, user may log into CLI via console port
first then execute the appropriate flashfs format command.)
14.
Please follow the steps described in Boot Code Upgrade to enter maintenance
mode, then input following commands sequentially:
Command Description
format cli
Erase configuration. This step is optional; if user wants to
use the default settings, please execute it.
dir cli
Make sure cli is erased – the size of CLI should be zero
format app1
Erase firmware.
dir app1
Make sure app1 are erased - the size of appl should be zero.
copy <srcDev/file> <dstDev/file>
Copy firmware from TFTP server to gateway device. For
example:
copy 172.25.25.100/appmgcp.bin.gz app1
15.
When upgrade is successfully completed, the system will reboot automatically
with new firmware.
Figure 65
Simple Maintenance Mode (via telnet)
¾
Situation 3
1.
Log into CLI via console port or remote telnet, and check whether the
firmware’s extension filename is
.cpr
or
.bin
. For
.cpr,
please go to step 2. If
.bin
, go to step 3.
2.
Input following commands sequentially and then jump to step 4.
Command
Description
flashfs format cli
Erase configuration. This step is optional, if user want to use
the default settings, please execute it.
