Technical specifications
-
4x4 30W COB matrix wash/blinder panel
-
intense projection, unlimited colour options!
-
Features 16 30W RGB COB LED chips with reflector and milky cover technology for optimal wash
projection
-
optimal projection of rich and vivid colours through COB LED technology
-
multiple operating modes
-
hardware coupling options to create large-scale, low-resolution video walls! (Tool included)
-
included one swivel U-bracket and two small U-brackets
-
Power cables included
-
stand-alone modes with built-in programs, user adjustable speed
-
sound controlled modes
-
master-slave modes with options for 2x2 and 4x4 matrix setups (slave 2-16 settings and multiple
show modes)
-
temperature controlled fans, combined with heatsinks for each LED source
-
multiple DMX channel settings, from 1 to 51 channels!
-
48 DMX-channel mode for pixel control of each LED
-
optimal pixel control features
-
smooth 16-bit dimmers, 4000 Hz flicker free LED control
-
white balance correction
-
3-pin and 5-pin XLR DMX input & output
-
on/off switch
-
LED display with menu buttons for setting adjustments
Technical details:
- 16x 30W RGB COB LED chip
- beam angle: 31 degrees (each LED), 54 degrees (full on)
- power connection requirements: 100-240V, 50/60 Hz
- power consumption: 220.3W
- fuse: F10AL250V
- power factor: 0.968
- maximum light output on full power: 20.700 lux @ 1m
- max. power output load: 15A
- ta: 0-40º Celsius
- exterior surface temp: 37º Celsius
- dimensions: 47.5 x 47.5 x 13 cm (without brackets/hardware)
- weight: 11 kg
Light output
1 LED
- Red: 532 lux @ 1m
- Green: 764 lux @ 1m
- Blue: 1054 lux @ 1m
- Full on: 2310 lux @ 1m
Light output all LEDs:
- Red: 5410 lux @ 1m
- Green: 7150 lux @ 1m
- Blue: 8800 lux @ 1m
- Full on: 20.700 lux @ 1m
Included accessories:
-
1x Neutrik Powercon to Schuko cable (3x 1.5mm²)
- 1x Neutrik Powercon to UK cable (3x 1.5mm²)
- 1x Neutrik Powercon to Neutrik Powercon link cable (3x 1.5mm², 3 meters)
- 1x hardware pack with mounting brackets, tightening knobs and rings
- 1x coupler tool to connect several units together
All information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0
Creation date + author initials: 13-05-2015 RV Revision date + author initials:
