Transport and storage
The IntenZ CB600 can be transported directly after shut-down. As the light sources of the fixture do not need
time to cool down, the device can be stored and transported instantly.
During transport, the device must be securely protected to ensure it stays reliable and in optimal shape.
Always use the original box and packaging material to transport the unit, or a fitting flight case or flight bag if
the device is transported frequently during mobile use.
Power input and output
The IntenZ CB600 is provided with an extra power output. This makes daisy chaining of several lighting
effects possible.
The output of the CB600 can handle a maximum power of 3450W. This equals around 15A based on a 230V
AC, 50 Hz connection. A maximum of 15 CB600 may be connected in daisy chain on the main CB600.
This also means that one matrix consisting of 16 CB600 fixtures can run on a single power cable. Please
note that a clean 16A power group is also required in order for the matrix to work properly. As for
entertainment purposes not all power is required at the same time (because the panels are either used for
blinding applications or visual effects) it may be better to spread the load of 16 panels over two 16A groups,
to ensure that power peaks do not have negative influence on your electrical system (for example voltage
drops).
Please be aware that no equipment with a power consumption larger than 3450W is connected to the output.
If you want to connect more than 15 CB600 fixtures or larger equipment to one CB600's output, the
connection to a power outlet and/or 16A group must be renewed.
All information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0
Creation date + author initials: 13-05-2015 RV Revision date + author initials:
