EN-28
o
Next, lift the door upwards and remove it, sliding it outwards; hold
the door by the side close to the hinges when doing this.
o
To replace the door, first slide the hinges into their grooves and open
the door completely.
o
Remember to turn the two moving links ”B” used to engage the two
hinges before closing the door.(Fig.1)
Warning
o
Take care not to remove the hinge locking system when taking off
the door, as the hinge mechanism can spring back suddenly.
o
Never submerge the door in water for any reason.
FIG.1
Cleaning the glass door (Fig.2)
o
If possible, remove the oven door glass following the manufacture’s
instructions. Use warm water with a little detergent to clean the glass
sections of the door.
o
Do not use abrasive products which could damage the glass.
Remember that if the surface of the glass panel becomes scratched,
it could cause a dangerous failure.
o
To simplify the cleaning, the inner glass panel can be taken out of
the door. The method for removing the glass from the door is shown
below.
o
After removing the screws fixing the glass, located on the inner face
of the door, lift the glass out carefully.