Axxess AXPIO-JT1 Скачать руководство пользователя страница 4

4

 AXXESS INTERFACE INSTALLATION

•  Provides accessory power (12-volt 10-amp)
•  Retains R.A.P. (retained accessory power)
•  Provides NAV outputs (parking brake, reverse, speed sense)
•  Allows visual of HVAC and gauges on Pioneer screen
•  Allows adjustment of HVAC functions through Pioneer screen
•  Retains audio controls on the steering wheel
•  Allows for auto stop/start override (if equipped)
•  Works in both Single and Dual-zone vehicles
•  Retains safety chimes  
•  Designed for amplified or non-amplified vehicles
•  Micro-B USB updatable
•  Allows the retention and adjustment of the OE Personalization Settings
•  Plug-n-Play installation
•  Designed for Pioneer’s DMH-W4600NEX/WC4660NEX
•  Painted scratch resistant matte black to match the OE finish
•  Includes radio antenna adapter & antenna adapter for GPS
•  Includes water resistant -IP68 rated direct OE camera replacement
•  Includes a 3' USB/AUX/HDMI® replacement cable with panel

FEATURES

• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape • Wire cutter • Zip-ties

TOOLS REQUIRED

• LD-CH5-PIO • LD-CHRYHAZ2T • LD-2PIN-CAN
• Radio interface • Jeep Camera (JP-JTKT) • PR04AVIC-PIO
• External Speaker • AXUSB-RAM1

AXUSB-RAM1 Installation .............................................................................................................. 5
Camera Removal ....................................................................................................................... 6-8
Assembly ....................................................................................................................................... 9
Wiring ...........................................................................................................................................10
USB Replacement & Camera Installation ....................................................................................11
Interface Installation ...................................................................................................................12
Dash Assembly .............................................................................................................................13
Radio Operation ...................................................................................................................... 14-15
Specifications ...............................................................................................................................16

COMPONENTS

TABLE OF CONTENTS

Содержание AXPIO-JT1

















Отзывы: