3
REV. 6/18/21
INSTAXPIO-JT1
KIT ASSEMBLY
(Figure C)
(Figure A)
(Figure B)
Pioneer Modular DDIN radio provision
1.
Secure the radio display to the
modular
radio brackets
using (6) screws supplied
with the radio. (Figure A)
Note:
Reference the installation manual
provided with the radio for which
hardware to use. The display screen and
radio chassis use two different types of
screws.
2.
Secure the radio chassis to the radio
display/bracket assembly using (4)
screws supplied with the radio. (Figure B)
3.
Route the RGB extension cable from the
radio chassis to the display screen, then
connect it to the display screen.
4.
Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
5.
Place the radio display into the dash,
then secure using the factory screws.
6.
Attach (4)
panel clips
provided onto the
radio bezel
, then attach the bezel over
the radio. (Figure C)
7.
Reassemble the dash in reverse order of
disassembly to complete the installation.
