23
:
Re-write
internal
parameters
This function is to over-write all parameter settings (TEXT file) with settings in the On-The-Go
USB disk from a previous setup or to duplicate inverter settings. Please check with your dealer
or installer for detail instructions.
:
Export data
log
Press “
” button to export data log from the inverter to USB disk. If the
selected function is ready, LCD will display “
”. Press “
” button to
confirm the selection again.
Press “
” button to select “Yes”, LED 1 will flash once every second
during the process. It will only display
and all LEDs will be on
after this action is complete.
Then, press “
” button to return to
main screen.
Or press “
” button to select “No” to return to main screen.
If no button is pressed for 1 minute, it will automatically return to main screen.
Error message for USB On-The-Go functions:
Error Code
Messages
No USB disk is detected.
USB disk is protected from copying.
Document inside the USB disk contains the wrong format.
If any error occurs, error code will only show for 3 seconds. After 3 seconds, it will automatically return to the
main screen.
2.
Timer Setting for Output Source Priority
This timer setting is to set up the output source priority per day.
Procedure
LCD Screen
Step 1: Press and hold “
” button for 3 seconds to enter Timer Setup Mode for output
source priority.
Step 2: Press “
”, “
” or “
” button to enter the selectable programs (detail
descriptions in Step 3).
Step 3: Please select setting program by following each procedure.
Program#
Operation Procedure
LCD Screen
Press “
” button to set up Utility First Timer. Press “
” button to
select staring time. Press “
” or “
” button to adjust values and press
“
” to confirm. Press “
” button to select end time. Press “
” or
“
” button to adjust values, press “
” button to confirm. The setting
values are from 00 to 23, with 1-hour increment.
