Assembly
6
3
2
1
7
6
5
4
PLEASE NOTE: FOR YOUR OWN SAFETY IT
IS REQUIRED THAT TWO PEOPLE ASSEMBLE
THIS MACHINE!
Unpack all the boxes and check all the components against
the ‘What’s in Included’ list. If any parts or components are
missing, please contact our customer services department
using the procedures and telephone numbers listed on our
website, and you will be dealt with quickly and efficiently.
Having unpacked the boxes, (please dispose of any
unwanted packaging responsibly), put the parts and
components whereby they are readily to hand. Break down
the main box by knocking the sides away (be careful of
exposed nails etc.), but leave the machine sitting on its
pallet. Remove the protective grease film that is coating
all the unpainted parts of the machine.
Leg Assembly
Remove the motor door lift & shift handle to prevent it from
being damaged when the machine is turned on its side.
Secure the front and back panels as shown in fig 7.
Locate the four lower leg columns (G), M8 bolts & washer (P)
and nuts (Q). Mount the legs to each corner of the machine’s
base and secure in position. NOTE: Make sure the two holes on
the side of each leg are in the upward position as shown in fig 4.
Mounting
holes
G
F
Panel mounting holes
Front/back
panels
