Axis Wake Research, Руководство пользователя

Страница: 86 / 136

Ensure all drain plugs are secure prior to launching your
boat. Damage caused as a result of these plugs not being
installed will not be covered under your Axis warranty.
Bilge Drain Plug
A T-handled, brass bilge drain plug is located in the bilge.
Location is mid-ship near the driver’s seat, reachable through
the access plate in the floor.
Ensure that all transom and bilge
drain plugs are securely in place
before placing the boat in the water.
Speedometer Pickup
Your boat is equipped with a Paddle wheel speedometer
pickup, which can be found directly under the running
surface of your boat. The paddle wheel is used to measure
static water by rotation of the paddle wheel unit. The
paddle wheel unit also monitors the Water Temperature
unless a Depth Transducer is installed (which will then
assume the responsibility to measure Water Temperature).
This information is transferred to the dash computer and a
computer program converts information which is transferred
to the speedometer gauge. The GPS puck is located under the
dash.
See Troubleshooting section of this manual for basic maintenance information.
2-19 Gauges & Controls
Figure 2-24. Thru-Hull
Paddle Wheel Pickup
Figure 2-23. Bilge Drain
Plug
Chapter 2_15_Axis.qxp_ Chapter 2 doc.qxd 6/19/14 10:27 AM Page 19