Axis Wake Research, Руководство пользователя

Страница: 109 / 136

It is important to keep your vinyl clean at all times. Some substances can stain the vinyl if
you leave them on for even a short period. Remove any contaminant and clean the area
immediately. Some household cleaners, powdered abrasives, steel wool, industrial cleaners,
dry cleaning fluids and lacquer solvents can damage and discolor. Failure to care for your
vinyl properly, or use of improper cleaners may damage the vinyl and void your warranty.
DO NOT use products such as acetone, ArmorAll ® , bleach, baking soda, Fantastik ® ,
Formula 409 ® , gasoline, kerosene, Murphy ® Oil Soap, Simple Green ® , Son of a Gun! ® or
any silicone based protectants. DO NOT clean your vinyl with power washers, as they can
generate pressures up to 3,500 psi and could damage the surface of your interior.
Common stains and steps to treat:
Type of Stain Step #1 Step #2 Step #3
General care A B
Dirt buildup A B
Ballpoint ink* B A
Chewing gum B A
Coffee, tea, chocolate B A
Grease C B A
Household soil A B
Ketchup A B
Latex paint A B
Lipstick C A B
Mildew or wet leaves* B A
Motor oil C B A
Oil-based paint C B A
Permanent marker* B A
Spray paint B A
Suntan lotion* A B
Tar/asphalt C B A
Yellow mustard A B
a. Medium-soft brush, warm, soapy water, rinse/dry
b. 303 Fabric and Vinyl Cleaner
® , rinse/dry
c. Wipe or scrape off excess (chill gum with ice)
After all cleaning methods, rinse well with clear, warm water.
Always allow the boat to dry completely before covering it for
storage. Covering a wet boat will trap moisture, allowing for
mold and mildew to grow. Stains from mold and mildew will
not be covered by the Axis boat warranty.
* Suntan lotion, tree pollen, wet leaves and some other products, including waxes, can
contain dyes that stain permanently.
Care and Maintenance 4-2
Chapter 4_15_Axis.qxp_ Chapter 4 doc.qxd 6/19/14 10:32 AM Page 2