AXIS StorPoint NAS
100 User’s Guide
Setup for NetWare (NCP)
19
3. Enter the appropriate settings for the following parameters:
4. Save the
config.ini
file to start the NDS server installation. The installation takes about 15
seconds, after which users will be able to access the StorPoint NAS in NDS mode.
5. To verify that the StorPoint NAS was successfully installed, check the
logfile.txt
file
located in the
System/ServerProperties
folder for errors.
6. After the installation you must logout and then login again to have all the necessary rights on
the StorPoint NAS server object and the associated volume.
Parameter name
Value
Description
TimeZone
=
Must be set to the correct time zone that the StorPoint NAS is operating in.
TimeSyncSource
= NDS
Set to
NDS
to enable the StorPoint NAS to get its time from the NetWare network.
NDSEnable
= yes
Set to
yes
to enable the NDS login.
NDSTreeName
=
Specify the name of the tree where you want to install the StorPoint NAS, e.g.
MEDCORP
NDSServerContext
=
Specify the distinguished name of the context in the NDS tree where you want to install the
StorPoint NAS, e.g.
Manufacturing.Medtec
NDSAdminName
=
Specify the distinguished name of a user or administrator with Supervisor or Create rights to
the context where you want to install the StorPoint NAS, e.g.
Admin.Medtec
NDSAdminPassword =
Specify the password of the administrator entered in NDSAdminName shown above. Once
written, this password will appear as ******.
NDSInstall
= install Change this to
install
when you are ready to install the StorPoint NAS.
Forced
will overwrite the
existing server object without warning.
NDSRightsStorage
= NDS
Set to
NDS
to store the access rights in the NDS tree. Set to
File
to store the access rights in a
file on the Novell server. This is necessary if you do not allow schema extensions in your NDS
tree, or if you do not have Supervisor access rights.
NDSRightsFile
=
If storing the access rights in a file on the Novell file server, specify the whole path to the file,
e.g.
CORPSERVER/SYS:NASSERVER/NASSRV.DAT
The specified directory must exist and the StorPoint NAS must have Read, Write, Create,
Erase, Modify and File Scan rights. The StorPoint NAS will create the file once you start adding
trustees. You fins a more detailed description in the “
AXIS StorPoint NAS 100 User’s Manual,
Appendix B - Troubleshooting”
.
TimeSyncSources
= SAP
Default is
SAP
for the network agreed time. Alternatively, enter the server names to be
contacted for time synchronization.
