Axis Q6044 PTZ Скачать руководство пользователя страница 49

Страница: 49 / 69

AXIS Q6044 PTZ Dome Network Camera

System Options

Note

Installed certificates, except preinstalled CA certificates, will be deleted if the product is reset to factory default. Preinstalled
CA certificates that have been deleted will be reinstalled.

Server/Client

certificate can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limited

protection and can be used before a CA-issued certificate has been obtained.

To install a self-signed certificate:

1. Go to

Setup > System Options > Security > Certificates

2. Click

Create self-signed certificate

and provide the requested information.

To create and install a CA-signed certificate:

1. Create a self-signed certificate as described above.

2. Go to

Setup > System Options > Security > Certificates

3. Click

Create certificate signing request

and provide the requested information.

4. Copy the PEM-formatted request and send to the CA of your choice.

5. When the signed certificate is returned, click

Install certificate

and upload the certificate.

Server/Client certificates can be installed as

Certificate from signing request

or as

Certificate and private key

. Select

Certificate

and private key

if the private key is to be upload as a separate file or if the certificate is in PKCS#12 format.

The Axis product is shipped with several preinstalled

CA certificates

. If required, additional CA certificates can be installed:

1. Go to

Setup > System Options > Security > Certificates

2. Click

Install certificate

and upload the certificate.

Audio Support

Select

Enable audio support

to allow clients to retrieve audio streams from the Axis product. For information on how to configure

audio settings, see

Set Up Audio on page 25

Note

Deselecting this option will disable audio globally in the Axis product, for configured events and profiles with audio as well.

Date & Time

The Axis product’s date and time settings are configured under

System Options > Date & Time

Current Server Time

displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (see

below).

To change the date and time settings, select the preferred

Time mode

under

New Server Time

•

Synchronize with computer time

– Sets date and time according to the computer’s clock. With this option, date and

time are set once and will not be updated automatically.

•

Synchronize with NTP Server

– Obtains date and time from an NTP server. With this option, date and time settings are

updated continuously. For information on NTP settings, see

NTP Configuration on page 52

If using a host name for the NTP server, a DNS server must be configured. See

DNS Configuration on page 52

•

Set manually

– Allows you to manually set date and time.

Содержание Q6044 PTZ






































































Результаты поиска

Содержание Q6044 PTZ

Отзывы:

Похожие инструкции для Q6044 PTZ

Бренды по названию

Популярные бренды

Axis Q6044 PTZ, Руководство пользователя

Результаты поиска

Содержание Q6044 PTZ

Отзывы:

Похожие инструкции для Q6044 PTZ

Бренды по названию

Популярные бренды