Axis 2N LTE Verso, Руководство по настройке

Страница: 121 / 211

2N TELEKOMUNIKACE a.s., www.2n.cz 121/211
RTP timeout – set the audio stream RTP packet receiving timeout during a call. If
this limit is exceeded (RTP packets are not delivered), the call is terminated by
the intercom. Set the parameter to 0 to disable this function. The parameter is
only set for account 1 but applies to both the SIP accounts.
– Set the Broadsoft PBX compatibility mode. Compability with Braodsoft device
Having received re-invite from a PBX in this mode, the intercom replies by
repeating the last sent SDP with currently used codecs instead of sending a
complete offer.
– Allow SRV record rotation for SIP Proxy and Registrar. This Rotate SVR record
is an alternative method of transition to backup servers in the event of main
server failure or unavailability.
Calls
Call Time Limit – set the call duration limit after which the call is automatically
terminated. The intercom signals termination with a beep 10 s before the call
end. Enter any DTMF character into the call (# on your IP phone, e.g.) to extend
the call time. If the call duration is set to 0 and SRTP is not used, the call is not
time limited.
Call Answering Mode(SIP1, SIP2) – set the incoming call receiving mode
Always busy – the intercom rejects incoming calls,
Manual – the intercom alerts incoming calls and the user answers them
using a numeric keypad button, and
Automatic – the intercom answers incoming calls automatically. You can
set the call receiving mode for each SIP account separately.
Automatic (DTMF only) – the intercom answers incoming calls
automatically only if DTMF without connection to a microphone and
speaker is received.
Local Call Receiving Mode – set the incoming local call receiving mode
Always busy – the intercom rejects incoming calls,
Manual – the intercom alerts incoming calls and the user answers them