Axis 2N LTE Verso, Руководство по настройке

Страница: 67 / 211

2N TELEKOMUNIKACE a.s., www.2n.cz 67/211
– select one of the pre-defined profiles or set the time profile for the given
element manually.
– Set the authentication mode for the time profile in this Authentication Mode
row including multiple authentication for enhanced security. Select Access
denied to ban access.
– Enable the zonal code for time profile and authentication Zonal Code
combintion in this row. You can use the zonal code instead of the user PIN.
Caution
If the time profile is unset, the authentication mode is ignored on the
given row.
Zonal Code – Enter the switch numeric zonal code consisting of two character at
least. However, four characters at least are recommended.
Authentication Signalling – select how to signal that a card or another identifier
has been read. The options are LED only (light signalling) or LED + sound (light
signalling), when the card has been read no matter if valid or invalid.
Virtual Card to Wiegand– Select a group of Wiegand outputs to which the
Virtual user card No. shall be sent after successful authentication. Can be
combined with any authentication method, including codes, fingerprints, etc.
Silent Alarm Enabled– A virtual code higher by 1 than the access code is
assigned to each access code and used for silent alarm activation. For example,
if the access code is 0000, then the silent alarm activation code is 0001. It
means, for instance, that silent alarm is 0000 for access code 9999 and so on.
Set the silent alarm action in the Automation section.
Limit Failed Access Attempts– Enable the maximum count of unsuccessful
authentication attempts. After five unsuccessful attempts (wrong numeric code,
invalid card, etc.), the access module will be blocked for 30 seconds even if
authentication is valid.