Axis 2N LTE Verso, Руководство по настройке

Страница: 85 / 211

2N TELEKOMUNIKACE a.s., www.2n.cz 85/211
None – button pressing does not affect the call setup or active call.
Hang up – button pressing terminates the call setup or active call.
Dial the following – button pressing initiates dialling of the following user
number in the users list. This accelerates the dialling process in case the
user is inaccessible on some of its phone numbers.
Flash – button pressing sends a special DTMF character (FLASH) into the
current call, to which the connected PBX can response with the selected
action.
Answer Incoming Call by Button – enables the incoming call pickuo by selected
quick dial button. The function can be disabled by selecting None.
Restore network settings by buttons – enable restoration of the default network
settings by pressing a sequence of the quick dial buttons after the intercom
restart as described in the
subsection in the Installation Device Configuration
Manual of the respective model.
The bulk editing function is available in intercom models with more than 3 buttons.
– reset the default button values, i.e. assign button 1 to position 1, button 2 Reset
to position 2, etc.
remove all button assignments. Clear –