Axis 2N LTE Verso, Руководство по настройке

Страница: 62 / 211

2N TELEKOMUNIKACE a.s., www.2n.cz 62/211
Command sent upon activation – set the command to be sent to the external
device (WEB relay, e.g.) upon switch activation. The command is sent via the
HTTP (GET request) and must be as follows:
. E.g.: http://ip_address/path
. http://192.168.1.50/relay1=on
Command sent upon deactivation – set the command to be sent to the external
device (WEB relay, e.g.) upon switch deactivation. The command is sent via the
HTTP (GET request) and must be as follows:
. E.g.: http://ip_address/path
http://192.168.1.50/relay1=off
Username – enter the username for the external device (WEB relay, e.g.)
authentication. The parameter is obligatory only if the external device requires
authentication.
Password – enter the external device (WEB relay, e.g.) authentication password.
The parameter is obligatory only if the external device requires authentication.
Note
The HTTP command sending is available with the Gold or Enhanced
Integration licence only.
Tip
The HTTP commands do not add URL encoding. If, e.g., you enter http://10.
27.24.6/message.cgi?action=9%3A%2F , the following is sent: http://10.27.24.6
. /message.cgi?action=9%3A%2F
To include URL encoding, enter, e.g.: http://10.27.24.6/message.cgi?action=9%
253A%252F and the following is sent: http://10.27.24.6/message.cgi?action=9%
. 253A%252F