AXIOMTEK SBC81200 Series, Руководство пользователя

Страница: 53 / 83

SBC81200 LGA775 CPU Card Series User’s Manual
Award BIOS Setup 47
z
Date
The date format is <day>, <month>,<date>, <year>. Press <F3>
to show the calendar.
day
The day of week, from Sun to Sat, determined by
the BIOS, is read only
date
The date, from 1 to 31 (or the maximum allowed in
the month), can key in the numerical / function key
month
The month, Jan through Dec.
year
The year, depends on the year of BIOS
z
Time
The time format is <hour> <minute> <second> accepting either
function key or numerical key. The time is calculated based on
the 24-hour military-time clock. For example, 1 p.m. is 13:00:00.
z
IDE Channel 0 Master/IDE Channel 0 Slave/IDE Channel 1
Master/IDE Channel 1 Slave
The categories identify the types of one channel that have been
installed in the computer. There are 45 predefined types and 2
user definable types are for Enhanced IDE BIOS. Type 1 to Type
45 are predefined. Type User is user-definable.
Press <PgUp>/<+> or <PgDn>/<
−
> to select a numbered hard
disk type or type the number and press <Enter>. Note that the
specifications of your drive must match with the drive table. The
hard disk will not work properly if you enter improper information
within this category. If your hard disk drive type does not match
or is not listed, you can use Type User to define your own drive
type manually.
If you select Type User, related information is asked to be
entered to the following items. Enter the information directly from
the keyboard and press <Enter>. This information should be
provided in the documentation from your hard disk vendor or the
system manufacturer.
If the controller of HDD interface is ESDI, select “Type 1”.
If the controller of HDD interface is SCSI, select “None”.
If the controller of HDD interface is CD-ROM, select “None”.
CYLS.
number of cylinders
LANDZONE
landing zone
HEADS
number of heads
SECTORS
number of sectors
PRECOMP
write precom
MODE
HDD access mode
If there is no hard disk drive installed, select NONE and press
<Enter>.