2022-05-31 | Technical improvements, changes in design, printing- and other errors reserved. | BA_MIE.pdf |
Page 61 of 68
4.13.3.
Read NIT
Under STEP 1: READ NIT (DVB-C) the devices in the network are displayed.
Select the devices from which the NIT is to be read out.
The device you are currently configuring (This device) is always selected.
Click on READ NIT.
The data of the devices are read in and listed under STEP 2: VERIFY NIT.
Note:
If necessary, you must reset the NIT before importing (see „Reset the NIT“ on page 62).
4.13.4.
NIT Check
Note:
If the NIT is edited, the headend automatically switches to cross-multiplex mode.
Values that overlap are displayed in red. These errors must be cleaned up before uploading.
Notes:
•
Different TS-IDs must always be assigned
•
The ON-ID must be the same for all headends
4.13.5.
Edit NIT
Click the pen symbol next to a line.
The fields can be edited.
Click on the plus sign in the column header.
An additional line is inserted.
Enter plausible data in the fields, matching the other values.
Values that overlap
