2022-05-31 | Technical improvements, changes in design, printing- and other errors reserved. | BA_MIE.pdf |
Page 47 of 68
The changing of the modulation standard begins, the remaining time ist shown as a countdown.
The device will be automatically rebooted, the enter password dialog will be displayed.
Enter the password again.
Check especially the modulator settings and their fill level.
4.4.
Config
4.4.1.
Erasing service data
In the section ERASE SERVICE DATA you can erase the settings of phase 1 and phase 2. The input streams and the selection of
programs are deleted.
Click on erase.
The frontpage will be shown.
4.4.2.
Save initialization data
In the section SAVE SYSTEM INITILIZATION DATA TO FILE you can save the current initilization data from phase 1 to 3 into a file
on your computer.
Click on SAVE.
The data will be saved in a file called config.dat at the download folder on your computer.
Click on PDF TO PRINT.
A PDF will be generated and saved in a file called config.pdf at the download folder on your computer.
Note:
Password and IP adress will not be saved.
