Axia IP-Intercom System, Инструкция по установке и эксплуатации

Страница: 49 / 52

S
pe
ci
fic
at
io
ns & W
ar
ra
nt
y • 4
1
Version 1.2 July 2010
Appendix C:
Specifications and Warranty
Axia System Specifications
Microphone Preamplifiers
• Source Impedance: 150 ohms
• Input Impedance: 4 k ohms minimum, balanced
• Nominal Level Range: Adjustable, -75 dBu to -20 dBu
• Input Headroom: >20 dB above nominal input
• Output Level: +4 dBu, nominal
Analog Line Inputs
• Input Impedance: >40 k ohms, balanced
• Nominal Level Range: Selectable, +4 dBu or -10dBv
• Input Headroom: 20 dB above nominal input
Analog Line Outputs
• Output Source Impedance: <50 ohms balanced
• Output Load Impedance: 600 ohms, minimum
• Nominal Output Level: +4 dBu
• Maximum Output Level: +24 dBu
Digital Audio Inputs and Outputs
• Reference Level: +4 dBu (-20 dB FSD)
• Impedance: 110 Ohm, balanced (XLR)
• Signal Format: AES-3 (AES/EBU)
• AES-3 Input Compliance: 24-bit with selectable sample rate conversion, 32 kHz to 96kHz input sample rate
capable.
• AES-3 Output Compliance: 24-bit
• Digital Reference: Internal (network timebase) or external reference 48 kHz, +/- 2 ppm
• Internal Sampling Rate: 48 kHz
• Output Sample Rate: 44.1 kHz or 48 kHz
• A/D Conversions: 24-bit, Delta-Sigma, 256x oversampling
• D/A Conversions: 24-bit, Delta-Sigma, 256x oversampling
• Latency <3 ms, mic in to monitor out, including network and processor loop
Frequency Response
• Any input to any output: +0.5 / -0.5 dB, 20 Hz to 20 kHz
Dynamic Range
• Analog Input to Analog Output: 102 dB referenced to 0 dBFS, 105 dB “A” weighted to 0 dBFS
• Analog Input to Digital Output: 105 dB referenced to 0 dBFS
• Digital Input to Analog Output: 103 dB referenced to 0 dBFS, 106 dB “A” weighted