AXELL D-CSR 3302 US VHF REPEATER
PRODUCT DESCRIPTION AND US
ER’S MANUAL
28
Doc PN 0034B-UM Rev. 2.1
© Axell Wireless Ltd
6
Setup
This section describes the available setup procedures: required and optional according to
your system installation.
6.1
Overview of the Setup Procedures
The following setup procedures are required to operate the repeater:
Assigning the repeater a recognizable name
– for easy identification of the source of
events
Defining channels
Setting the clock and time
– used to timestamp events
Additional setup procedures
– according to your system installation and requirements:
Configuring external alarms
IP address
– for connection to the Ethernet network
SNMP support
TCP/IP
Modem setup
6.2
Assigning Repeater a Recognizable Name
The D-CSR is automatically assigned an ID by the AEM. In addition, it is recommended to
assign each repeater a recognizable name that will identify the location, site name, etc.
To assign the Tag
NOTE: The repeater tag can be locked in order to prevent being accidentally modified from the AEM
side (unlock by clicking on the
button).
1. In the Home screen, under the
General
section next to
Tag
, click the
Edit
option.
2. Assign the Repeater a name (up to 30 characters) that indicates the location of the
Repeater.
3. Click
OK
.
TAG
