Axel A110130000 Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 79

Axel A110130000 Скачать руководство пользователя страница 60

APPENDIX F - FIRMWARE UPGRADE PROCEDURE

| APPENDIX F - FIRMWARE UPGRADE PROCEDURE

60

10

APPENDIX F - FIRMWARE UPGRADE PROCEDURE

Fox  leaves  the  manufacturer  with  the  latest  firmware  installed  just  prior  to  shipment.  Once
purchased, the firmware can be updated with the latest version. available The Firmware Upgrade
can be run in the Windows working environment . Supported operating systems include: Windows
Xp  Sp3, Windows  Vista  and  Windows  7  Ultimate  32/64  Bit.  Ensure  you  have  installed  Microsoft
.net  4  on  the  operating  system. Where  this  is  not  the  case,  visit  the  site

www.microsoft.com

for

installation.

In order to upgrade the processor, please follow this procedure:

After the initialisation of the device (firmware upgrade), all the settings and adjustments of the
user may be deleted and/or overwritten by the new settings of the manufacturer! Please save the
current configuration in a document external to the device before proceeding with the firmware
update.

During the firmware update, do not forget to install the new version of the software associated
with  remote  control  of  the  PC.  There  is  a  direct  correspondence  between  the  firmware  and
software  versions.  For  example,  version  3.0  of  the  Pc  software  requires  firmware  version  3.0
installed  on  the  unit  and  vice  versa.  More  precisely,  the  first  two  digits  must  match,  as  far  as
possible,  the  sub-versions  (identified  by  the  third  digit)  not  related  to  the  firmware/software
compatibility.

As a general rule, the software version X. Y. Z is performed with the X. Y. K firmware version.

10.1 PREPARATION OF THE UNIT FOR UPGRADE

To correctly run the upgrade of a Fox device, a Rs232 type Serial COM port must be used. If the port is native on the
motherboard of the pc from which you are working you do not need to set the port characteristics, while if you are using
USB-to-Serial adapters, in some cases you may need to set certain port data such as speed and stop bit. The software
upgrader works with port values:

38,400bps, 8-N-1

Below are these step-by-step instructions to proceed correctly to the upgrade:

a.

Close all applications open on the PC.

b.

Navigate to the FwUpgrades folder

c.

Click twice on the file associated with the upgrade to be performed

d.

Launch the program _Upgrader_V2xx.EXE

e.

Fox_Upgrader_V201.exe

NB: to check the current version of Fox owned, access the Firmware Version page from the system information menu.

f.

Select the

serial port

of the PC

on the screen

g.

Turn off

the Fox device

h.

Turn on

the Fox device and

3 seconds after power on click the CONNECT key

i.

Once the software is connected

with the Fox device, the following screen will appear. At the same time, the frontal

display of the device

remains completely empty

, not showing any indication.

«
...
58
59
60
61
62
...
»

Содержание A110130000
















































































Отзывы:

Нет отзывов