DETAIL OF AUDIO CHANGEOVER REMOTER
| DETAIL OF AUDIO CHANGEOVER REMOTER
39
7.7 OUTPUT SECTION
Once the inputs have been set and programmed, in the part dedicated to Outputs all that remains is to set a number of
technical values such as the level of output and the ability to accept external commands. This software part is separated
into two areas, the first is the Digital output while the second represents the Analog audio output. The table below the
photograph of the Fox screen shows in detail the possible settings.
CONTROL NAME
FUNCTION
Nominal Output
Level
It represents the nominal output level of the Analog and Digital signal. The permitted values range
from -24.0 dBFs to 0.0dBFs for the Digital part while they range from -10.0 dBu to +14.0 dBu for
the Analog part.
Frequency
Sampling frequency of the Digital signal in use. The permitted values are:
-
32 kHz
-
44.1 kHz
-
48.0 kHz
-
64.0 kHz
-
88.2 kHz
-
96 kHz
Resolution
Resolution value of the of the Digital signal in use. The permitted values are:
-
16 bit
-
20 bit
-
24 bit
Source
It represents which INPUT source must be sent to the Digital or Analog output. The available
values include
InputA / InputB / InputC / InputD / Automatic / Off
By entering the
Automatic
value, the use of the Audio Changeover between Inputs is also
implicitly inserted and thus also respecting of the side Input Priority Sequence. Entering instead an