DETAIL OF AUDIO CHANGEOVER REMOTER
| DETAIL OF AUDIO CHANGEOVER REMOTER
42
The photo below shows the protocol of the DTMF commands; to open this help press the "?" key
The string format is AAA
-O
C-RR
Where AAA is meant as the command destination that can be toward a single Fox or a group of Foxes (see
CommandString Help on the next page).
OC means OUTPUT and COMMAND, the command can be sent to the Analog output (1) or to the Digital output (2) or
directly to the GPO via the (3). C means the COMMANDS related to the GPO output.
Example 1:
The example above, that is the tutorial included within the command software both of Fox and of Genius D, is an
example of the command *
401206
and what it means:
* 40 =
Command sent to all the Foxes / Genius D whose last two digits are 40 in their Address ID.
1 =
Action to be carried out on the ANALOG OUTPUT (1)
2 =
command to be carried out on the variable shown above, i.e. on the analog output, thus C=2 as a result input -B is
sent to the Analog output.
06 =
06 minutes multiplied by x5 stable minutes = 30 minutes, i.e. the above requested command is run for 30 minutes,
at the end of which the command is terminated and the initial condition returns, which is the same as before execution of
the command.