DETAIL OF AUDIO CHANGEOVER REMOTER
| DETAIL OF AUDIO CHANGEOVER REMOTER
40
Input fixed value, the Audio Changeover is implicitly disabled and there continues to be a single
fixed source towards the Analog or Digital output.
As such, to change an input with respect to an output, commands (GPIn or SNMP) can be sent to
the device, assuming that the Accept ExtCmds checkbox is enabled.
Input Priority
Sequence
It represents the sequence in which the Audio Changeover is set. The setting of each individual
priority occurs from every single
INPUT
, this box is only to display of the order of assigned
priorities.
Digital Output priority sequence
Analog Output priority sequence
Accepts ExtCmds
If flagged, it enables change of the input sources depending on receipt of external commands such
as GPIn or SNMP.
Generator
If enabled, it enters a 100 Hz / 0 dBm signal on the selected output, very useful when having to
calibrate or test an audio chain. Possible options include:
-
Off
-
Left and Right
-
Only Left
-
Only Right
Output Mode
Selection of the output mode, the possibilities include:
-
Stereo
-
Mono (Left)
-
Mono (Right)
-
Mono (Left + Right)
UNDO
Clicking this key restores the default values set in production for each individual panel.