Axel A110130000 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 79

Axel A110130000 Скачать руководство пользователя страница 34

DETAIL OF AUDIO CHANGEOVER REMOTER

| DETAIL OF AUDIO CHANGEOVER REMOTER

34

CONTROL NAME

FUNCTION

Sensitivity

Input Analog Sensitivity Adjustment. The permitted values range from -12dBu to +12dBu

AGC Speed

Adjustment of the speed of the Automatic Gain Control (AGC). The permitted values range
from Off to +2.00 dB/s in steps of 0.05db /s

AGC Max Gain

It represents the maximum gain that the AGC can introduce at the input level. The permitted
values range from +1.0 dB to +12.0 dB in steps of 1.0 dB

Input Mode

Represents the working mode of the input stage. Possible options include:

-

Stereo

-

Mono (Left)

-

Mono (Right)

-

Mono (Left+Right)

-

Swap (Left/Right)

-

Stereo Inv Right

-

Stereo Inv Left

-

Swap Inv Right

-

Swap Inv Left

The Stereo-Mono classical modes of working  are also completed by test functionality such as
Swap  and  Stereo  Inv,  where  via  INV  the  steps  of  the  balanced  audio  signal  are  reversed
creating  or  eliminating  a  possible  counterphase  and  where  via  Swap  the  Left  from  Right  is
reversed.

Fading Mode

Represents the Fade mode, or mode of transition between one source and another.
Possible options include:

-

Fast Switch

-

Slow Fading

-

Normal Fading

-

Fast Fading

Fast Switch means a sudden and rapid switch from one source to another with a net switching.
Slow-Normal-Fast Fading instead represent an INITIAL fade switching, i.e. fading in opening
then fading towards the new source just switched.

Check Both
Channels

This checkbox is used to operate the Fox on both the Left and Right channels; if not selected,
Fox only controls the LEFT+RIGHT (mono) product.

Threshold

This  parameter  represents  the  level  below  which  to  consider  the  audio  source  invalid.  In
practice,  it  is  the  minimum  working  threshold  of  the  Changeover.  The  permitted  values  range
from -40dB to - 25dB

Wait Time

Changeover waiting time that is activated by the Threshold control before switching to a
different audio source. The permitted values range from 01 seconds to 120 seconds.

Return Time

Changeover waiting time before considering the primary source valid again. When the input
level exceeds the <threshold>, for a time equal to or greater than <return time> then the source
is considered valid again and the exchange from backup to primary is performed. It is very

«
...
32
33
34
35
36
...
»

Содержание A110130000
















































































Отзывы:

Нет отзывов