DETAIL OF AUDIO CHANGEOVER REMOTER
| DETAIL OF AUDIO CHANGEOVER REMOTER
45
7.8.3 General Purpose I/O Section
In this section are set the features of General Purpose both in Input and in Output. GP Inp means the features that must
be performed by Fox upon receipt of a GPIn on port 1,2,3 or 4.
These are possible for the GP In:
a. DTMF CMD1:
Upon closure of GPIn 1 the DTMF CMD1 string present in the DTMF Generator panel is
launched.
b. DTMF CMD2:
Upon closure of GPIn 2 the DTMF CMD1 string present in the DTMF Generator panel is
launched.
c. DTMF CMD3:
Upon closure of GPIn 3 the DTMF CMD1 string present in the DTMF Generator panel is
launched.
d. DTMF CMD4:
Upon closure of GPIn 4 the DTMF CMD1 string present in the DTMF Generator panel
is launched.
e. INP A ON ANOUT: Changes
of the input with respect to the Analog audio output
f.
INP B ON ANOUT: Changes
of the input with respect to the Analog audio output
g. INP C ON ANOUT: Changes
of the input with respect to the Analog audio output
h. INP D ON ANOUT: Changes
of the input with respect to the Analog audio output
i.
INP A ON DIGOUT: Changes
of the input with respect to the Digital audio output
j.
INP B ON DIGOUT: Changes
of the input with respect to the Digital audio output
k. INP C ON DIGOUT: Changes
of the input with respect to the Digital audio output
l.
INP D ON DIGOUT: Changes
of the input with respect to the Digital audio output
These are possible for the GP Out:
a.
ALARM:
the condition of Alarm occurs when Fox has not been able to perform the switchings set. Where a
switch is not effected, Fox displays the Alarm indication on the front panel; in the control software the
corresponding LED is lit and the GPO is possibly closed.
b. DTMF FUN1:
When a DTMF string is correctly
decoded, it coincides with the closing of the
corresponding GPO.
c. DTMF FUN2
: When a DTMF string is correctly
decoded, it coincides with the closing of the
corresponding GPO.
d. DTMF FUN3
: When a DTMF string is correctly
decoded, it coincides with the closing of the
corresponding GPO.
e. DTMF FUN4
: When a DTMF string is correctly
decoded, it coincides with the closing of the
corresponding GPO.
f.
INPUT A ON ANOUT
: This GPO goes to (1) when input -A is valid and is on the Analog output
g.
INPUT B ON ANOUT:
This GPO goes to (1) when input -B is valid and is on the Analog output
h.
INPUT C ON ANOUT
: This GPO goes to (1) when input -C is valid and is on the Analog output
i.
INPUT D ON ANOUT
: This GPO goes to (1) when input -D is valid and is on the Analog output
j.
INPUT A ON DIGOUT
: This GPO goes to (1) when input -A is valid and is on the Digital output
k.
INPUT B ON ANOUT:
This GPO goes to (1) when input -B is valid and is on the Digital output
l.
INPUT C ON ANOUT:
This GPO goes to (1) when input -C is valid and is on the Digital output
m.
INPUT D ON ANOUT:
This GPO goes to (1) when input -D is valid and is on the Digital output
n.
SIGNAL A
: Only corresponds to the Audio-Detector of input -A, this GPO goes to (1) when the source located
at input -A is considered valid.
o.
SIGNAL B
: Only corresponds to the Audio-Detector of Input -B, this GPO goes to (1) when the source located
at input -B is considered valid.