AWT PIM-P Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 110

AWT PIM-P Скачать руководство пользователя страница 81

9-4

PIM-P Analyzer User’s Manual

Copyright AWT-Global, LLC. All rights reserved.

Screen Capture / Print

9.1.2

This menu provides capabilities to capture a screen shot from any Graphical Display of

the Analyzer Mode. Capturing a screen shot requires manual trigger, entering a file name,
drive  and  directory.  By  default,  the  file  name  consists  of  date  and  time,  but  can  be
modified by the user. The file is stored in jpeg format by pressing the blue save button. The
stored  file  has  a  size  of  about  150kB.  In  addition  to  the  graphic  display  and  IM  related
information the  screen  capture procedure  allows  the  user to  enter  equipment  information
and a serial number for the DUT.

Note: Only the graphic display and relevant information is stored with the screen shot.

Active measurements will be stopped during the screen capture process.

«
...
79
80
81
82
83
...
»

Содержание PIM-P















































































































Отзывы:

Нет отзывов