AWT PIM-P, Руководство пользователя, Страница: 42 / 110

7-16
PIM-P Analyzer User’s Manual
Copyright AWT-Global, LLC. All rights reserved.
F1 (dBm) XX.X F1 Power level in dBm
F2 (dBm) XX.X F1 Power Level in dBm
IM3 Bandwidth (Hz) XXXXX IM 3 Bandwidth in Hz
PIM-P Type XXX
Example: “F03”
Model String - 40 Characters max
Serial Number String - 40 Characters max Serial number of test system
HW Version String - 40 Characters max Hardware version
SW Version String - 40 Characters max Software version installed
OS Version String - 40 Characters max Operating system
Carrier String - 70 Characters max Carrier name
Site Name String - 70 Characters max Site / Test description
Feeder String - 40 Characters max Feeder description
User String - 70 Characters max User name / Initials
“Acewavetech”
String For internal use
“PIM-P Data Log”
String For internal use
Cal date YYYYMMDD Date of Last Calibration
CHKSUM XXX For future use
Added with firmware version 1.2 and later.
Sector String – 40 Characters max Sector description.
BarGraph_RG -XXX Value of Bar Graph green /
red threshold (-dBc).
RFON String RF On time in seconds, 1m,
2m, 5m, 10m, 20m, 30m,
60m, 120m, 180m or “Always
On”.
RECINTRV String Lists Recording interval time
and units or “OFF”.
ALC String – 3 Characters max
“ON” or “OFF”
Log File Management 7.2.8
All measurements are stored in separate log files. When transferring files to an external
drive (e.g. memory stick), all log data is merged into one file for ease of importing into
databases and spreadsheets.
Default drive directory and file name of the merged log data-sets is:
D:\Site Info\PIM _Site_all.log
The default setting can be overwritten when specific locations or filenames are required
(requires keyboard).