AWT PIM-P, Руководство пользователя, Страница: 8 / 110

2-3
PIM-P Analyzer User’s Manual
Copyright AWT-Global, LLC. All rights reserved.
KEEP AWAY FROM LIVE CIRCUITS
Operating personnel must not remove instrument covers. Component
replacement and internal adjustments must be made by qualified
maintenance personnel only. Never replace components or operate the
instrument with the covers removed and the power cable connected. Even
with the power cable removed, dangerous voltages may be present.
Always remove all jewelry (rings, watches, etc.) and discharge circuits
before touching them. Never attempt internal service or adjustment of the
test system unless another person, capable of rendering first aid and
resuscitation, is present.
DO NOT SUBSTITUTE PARTS OR MODIFY INSTRUMENT
Do not substitute parts or perform any unauthorized modification of the
instrument. Return the instrument to AWT for repair to insure that the
warranty and safety features are maintained.
NON IONIZING RADIO FREQUENCY RADIATION HAZARD
This device generates Radio Frequency (RF) energy under normal
operation, and should always be operated in accordance with local and
national licensing laws. RF energy in the 700 to 1,000 MHz and 1,800 to
2,200 MHz with a total power of up to 50W Watts or +47 dBm is present
at the test port during testing. The Test Port is to be terminated into a non
radiating 50 ohm load to reduce the risk of RF exposure. Do not switch RF
Power On if Test Port is open or load is unknown.
ELECTRIC SHOCK HAZARD
The device is supplied with 100 to 240 Volt AC. Prior to AC
connection always inspect the power cord and instrument case for damage.
If damage is observed, do not use this until inspected and repaired by an
authorized AWT Service center.
2.2 DISCLAIMER
PIM-P Analyzers transmit two settable CW RF signals, with a power of up to 25W each,
to measure passive intermodulation of components and transmitting systems.
ACEWAVETECH is under no circumstances accountable for use of PIM-P analyzer not
conforming to laws and regulations of national and local authorities. Customer / user bear
the full responsibility and legal accountability to use PIM-P only in a lawful manner.