Awoco RH-WQ Island Mounted Series, Руководство пользователя

Страница: 9 / 16

9
INSTALLATION PREPARATIONS
IMPORTANT!
Observe all governing codes and ordinances.
It is the customer's responsibility:
• To contact a qualified electrical installer;
• To ensure that the electrical installation is in
compliance with applicable codes and standards.
Electrical Requirements:
• A 120V, 60Hz., AC only, 15A fused electrical
circuit is required.
• Wire sizes and connections must conform with
the power rating of the range hood and all
applicable codes and standards.
• DO NOT have a fuse in the neutral or ground
circuit.
• The 3-prong outlet should be grounded. If the
power cord plug is not used, the power cord’s
green wire should be connected to ground.
Check with a qualified electrician if you are not
sure that the range hood is properly grounded.
• DO NOT ground to a gas pipe.
• The range hood must be connected with copper
wire/plug only.
• The range hood should be connected directly
to the fused disconnect box (or circuit breaker)
through flexible armored or non-metallic
sheathed copper cable. ETL listed strain relief
must be provided at each end of the power
supply cable.