11
INSTALLATION
not blocked by the ceiling.
• Insert the screws into the holes and fasten them
so that the mounting plate is securely mounted
to the ceiling.
• Remove the cover of the electrical box.
• Pull the house wiring through the 6-3/4" hole in
the ceiling and into the electrical box. Secure
the house wiring cables to the mounting plate /
electrical box with appropriate connectors.
• Install the inner duct cover and outer duct cover
to the mounting frame.
• Install the top exhaust to the range hood.
Connect the top exhaust to a 6" round duct and
seal the connection.
• Lead the other end of the duct through the
mounting frame and the hole in the ceiling.
• Install the range hood to the bottom of the
mounting frame.
CAUTION
Make sure the range hood is securely mounted
before releasing.
• Connect the free end of the duct to the roof / wall
cap.
Electrical Connection
• This range hood comes with a power cord with
a 3-prong plug. Connect the power cord to a
designated grounded standard 110V outlet.
WARNING
Electrical Shock Hazard
Disconnect power before servicing
• In case of a direct connection to the house wiring
is preferred, do the following:
•
Disconnect the power.
•
Cut off the plug from the power cord.
•
Connect the wires from the power cord to the wires from
the house wiring using UL listed wire connectors.
•
Store the excess wires in the wiring box.
•
Reconnect the power.
Installing the Baffle Filters
•
Peel off the protective cover from the baffle filters
if there's any.
•
Align the baffle filters with the range hood and
install them from left to right.
Completing the Installation
Turn blower ON in the control panel. Check all lights
and fan operations.
Содержание RH-WQ Island Mounted Series
Страница 1: ...Range Hood OWNER S MANUAL RH WQ Island Mounted Series ...
Страница 2: ......
Страница 16: ...Website www awoco com Customer Support 1 888 412 3428 ...