MAIN MENU
32
3) REC
Select if you want to enable recording for the selected channel (ON / OFF).
Note:
When this function is disabled, no manual, event or timer recording will be activated even if any
of these three record functions is set to “ON”.
4) TIME STAMP DISPLAY
Enable this function and the recording time will be shown on the video during video playback.
5) CHANNEL
TITLE
Click the channel title column to change the channel title (up to 12 characters). The default title is the
channel number.
6) REC
AUDIO
Enable or disable audio recording for the selected channel if the connected camera supports audio
recording.
6.4.2 DETECTION
ADVANCED CONFIG
CAMERA
CH1
CH2
CH3 CH4
DETECTION
LS
07
ALERT
SS
03
NETWORK TS
02
DISPLAY
MOTION
OFF
RECORD
ALARM
OFF
DEVICES
AREA
EDIT
DCCS
PRIVACY
MASK
(For selected models only)
EDIT
IVS
INTERNAL
ALARM
(For selected models only)
ON
NOTIFY
EXIT
1) LS (Level of Sensitivity)
“LS” is to set the sensitivity of comparing two different images. The smaller the value is, the higher sensitivity
for motion detection. The highest sensitivity setting is 00, and the lowest sensitivity setting is 15. The default
value is 07.
2) SS (Spatial Sensitivity)
“SS” is to set the sensitivity for detecting the size of one object (the number of the grids) on the screen. The
smaller the value is, the higher sensitivity for motion detection.
The highest sensitivity setting is 00, and the lowest sensitivity setting is 15. The default setting is 03.
Note:
The default setting of SS is 03, which means once an object is detected more than 3 grids, the
system will get triggered. So the value of SS must be less than the number of grids that you set
up for the motion detection area.
3) TS (Time of Sensitivity)
“TS” is to set the sensitivity regarding how long one object stays in the detection area and triggers the
recording. The smaller the value is, the higher sensitivity for motion detection.
The highest sensitivity setting is 00, and the lowest sensitivity setting is 15. The default setting is 02.
4) MOTION
Select if you want to activate the motion detection function for the selected channel (ON/OFF).
5) ALARM
Select N.C./ N.O depending on your installation need. The default alarm value is OFF.
