Avtech AVR-EB4-B, Инструкция по эксплуатации

Страница: 60 / 83

Once the DUT is installed in the appropriate pocket, close the tan-colored socket lid
and the black main lid. Both must be closed for proper operation.
The instrument and the DUT will not be damaged if the diode is installed with the
incorrect orientation (i.e., with the anode and cathode reversed). However, incorrect
waveforms will be generated.
The IN, OUT, and CONTROL connectors are on the rear of the jig, below the hinges:
AVX-TRR- DO214AC TEST JIG
The AVX-TRR-DO214AC accepts DO214AC type SMT packages in a Loranger 03481
101 6218 socket. This socket has five identical “pockets” that each accept a DO214AC
package. Only one DUT should be installed at a time. All five pockets are wired in
parallel, so any of the five pockets can be used.
The test jig is shown below:
60