16
Item Description
Account
Change your default account password if needed.
This change can also be made in “Config.”
“General”
“Account”.
Date and Time
Check and select the current date and time.
Network
Configure your network setting based on the network type you’re using. For details,
please refer to Step4 & Step5.
Step4: In “Network”, configure the network setting of your camera based on the network type you’re using.
There’re three types: Static IP, PPPOE and DHCP.
For Static IP:
a) Enter the information of “Server IP”, “Gateway” and “Net Mask” obtained from your ISP (Internet
Service Provider).
b) Enter the port number. The valid number ranges from 1 to 9999. The default value is 88.
c) Click “Save” to save your network configurations, and log out.
d) Disconnect your camera and your PC, and connect them to Internet separately. Then, enter the IP
address you just note down in the URL address box of the web browser, and see if you can access
the camera successfully.
For PPPOE:
a) Enter the user name and password obtained from your ISP, and click “Save”.
b) Continue the DDNS setting as instructed in Step5.
For DHCP:
a) Before selecting this option, you need to finish the DHCP router settings first.
b) Get a router and connect it to the Internet via your PC (with Static IP or PPPoE setting). There are
different setting methods for different routers. Please refer to their respective user manuals.
c) Continue the DDNS setting as instructed in Step5.
Step5: (Optional) Click “DDNS” (
) to continue setting for PPPOE and DHCP.
