AVT Titan, Руководство оператора

Страница: 59 / 202

3 – 5 9 040 7448 329657 (04.97) PC-SW 4.5
C H A P T E R 3 : O P E R A T I O N W I T H A P C
To make a selection, move the slide selector on the screen (by pressing and
holding down the left mouse key with the cursor placed above the selector and
then moving the mouse). The mode that is set can only be used if the far end
(partner’s) equipment supports the same mode. If this is not the case, the
equipments “agree” to communicate with each other in a mode that both sup-
port (capability exchange).
3.3.5.2 PRIVACY: Muting the audio inputs
The PRIVACY function enables the muting of the audio sources. This way, the
videoconference partner at the remote end does not hear what is being said
locally.
3.3.5.3 Forced synchronisation between sound and picture – LIP-SYNC
If this switch is set to ON, the audio signal is delayed until there is synchronism
between picture and sound. If you want to hear the audio signal as soon as
possible, set LIP-SYNC to off.
3.3.5.4 AUDIO SOURCE: Selecting the audio source
Five different audio sources can be selected:
Phantom feeding can be used for the microphones.
3.3.5.5 LINE OUT, SPEAKER: Selecting the audio output
Depending on availability you can switch both audio outputs (LINE OUT,
SPEAKER) on and off individually. To do this simply place the switch
to the position required. Both outputs can be active at the same time.
Setting Meaning
OFF The sound from the selected audio source is transmitted.
ON The selected audio sources are muted
MUSIC The selected audio sources are muted. Instead, music is transmitted to the re-
mote end.
Setting Meaning
MIC 1 Uses only microphone 1 as source for the audio transmission
MIC 2 Uses only microphone 2 as source for the audio transmission
MIC 1+2 Mixes the microphone channels 1 & 2 for audio transmission
LINE Uses the line interface as source for the audio transmission
OFF Switches the audio transmission off