AVT Titan, Руководство оператора

Страница: 116 / 202

5 – 1 2 2 040 7448 329657 (04.97) PC-SW 4.5
C H A P T E R 5 : C O M M A N D S
DIS(CONNECT)
Description: The DISCONNECT command terminates all active calls at the
X.21 interfaces irrespective of whether the call was set up at
the near end or far end. This command is only available in the
X.21 interface modes 3 and 4.
Command: ^B DIS <cr>
Response: ^P DIS <cr>
- Command executed -
^P DIS <^N> 1 <^N> 1 <cr>
- Syntax error -
^P DIS <^N> 1 <^N> 2 <cr>
- Command not executable -
ECHOC
Description: Calibration of the echo canceller
Command: ^B ECHOC
Response: ^P ECHOC <cr>
- Command executed -
^P ECHOC <^N> 1 <^N> 1 <cr>
- Syntax error -
^P ECHOC <^N> 1 <^N> 2 <cr>
- Comm. not executable -
Parameter 1:
ON Switches the echo canceller on
OFF Switches the echo canceller off
OUT Music is activated. The volume can be controlled
with the VOL(UME) command
CAL The echo canceller is calibrated
ER(ASE)
Description: No function. Implemented for compatibility with CLI.
FAC(TORY)
Description: This command is used to load the factory settings
Command: ^B FAC <cr>
Response: ^P FAC <cr>
- Command executed -
^P FAC <^N> 1 <^N> 1 <cr>
- Syntax error -
^P FAC <^N> 1 <^N> 2 <cr>
- Comm. not executable -
Note:
v
This command switches the RS232C interface over to packet
format. This command should therefore not be used if the inter-
face is being operated in string format.