AVT MAGIC TH6 POTS, Руководство по аппаратному и программному обеспечению

Страница: 21 / 136

PAGE 21
P u t t i n g t h e s y s t e m i n t o o p e r a t i o n
3 P U T T I N G T H E S Y S T E M I N T O O P E R A T I O N
3.1 Mounting
With its dimensions (W
×
H
×
D) of 434 mm
×
44,5 mm (1 U)
×
252 mm the
MAGIC TH6 system can be either used as desktop device or mounted in a 19“
rack. The corresponding 19“ mounting brackets are included in delivery.
The dimensions given above are valid for the table top version with no feet. If
MAGIC TH6 is to be inserted into a rack, it should be remembered that the
bending radius of the cables should always be greater than the minimum al-
lowed value.
When the MAGIC TH6 Telephone Hybrid is installed, please make sure that
there is a sufficient air ventilation: It is recommended to keep a spacing of ca.
3 cm from the openings. In general, the ambient temperature of the system
should be within the range of +5
°
C and +45
°
C. These limits are especially to
observe if the system is inserted in a rack. The system works without any ven-
tilation.
During the operation the air humidity must range between 5% and 85%.
3.2 Connection to the mains voltage
The integrated power supply of the MAGIC TH6 can be operated on a voltage
(mains) between 100 V and 240 V. The mains frequency can vary between
50 Hz and 60 Hz. The maximum power consumption is a maximum of ap-
prox. 14 W.
After switching on, the display flashes for approx. 1 second and an internal
reset is triggered. This is indicated by a switched off display. After approx. 10
seconds, the unit is operational and the display should indicate „AVT MAGIC
TH6“.
3.3 Operating elements on the front side
The system has an illuminated graphical display with a resolution of 160 x 32
pixels and 19 operating buttons.
On the right, next to the display, there are two softkeys whose current func-
tions are indicated on the display. In the middle there are two buttons for nav-
igation (selection upwards/downwards), two buttons for accepting/drop-
NOTICE Incorrect ambient temperature and humidity can cause functional defi-
ciencies.
Operation outside the threshold values indicated above leads to a loss of
warranty claim.
The MAGIC TH6 must therefore be operated within the specified limits.
!