AVT MAGIC TH6 POTS, Руководство по аппаратному и программному обеспечению

Страница: 56 / 136

PAGE 56
O p e r a t i o n v i a W i n d o w s P C S o f t w a r e
Under
POTS Line/ISDN Line
you select if you want to signal the status
of Line
1
, Line
2
, Line 3, Line 4, Line 5, Line 6 or all lines (
Any
). If you
select
Any
, the signal is set on the TTL Pin as soon as one of the lines
has the predefined status.
–
Audio Line
: With this function you can signal when a caller is switched
to a certain Audio line. Please select under
Audio Line
the desired Au-
dio line. Under
POTS Line/ISDN Line
you select if you want to signal
the status of Line
1,
Line
2,
Line
3,
Line
4,
Line
5,
Line
6
or all lines
(
Any
). If you select
Any
, the signal is set on the TTL Pin as soon as one
of the lines has been set to the predefined Audio line.
–
ON AIR:
If you select this function, it is signalled when a caller is
switched to ON AIR. Under
POTS Line/ISDN Line
you select if you
want to signal the ON AIR status of
Line 1, Line 2, Line 3, Line 4, Line
5, Line 6
or all lines (
Any
). If you select
Any
, the signal is set on the TTL
Pin as soon as one of the lines is switched to ON AIR.
–
PRETALK:
If you select this function, it is signalled when a caller is
switched to Pretalk. Under
POTS Line/ISDN Line
you can select if you
want to signal the Pretalk status of Line
1
, Line
2
, Line 3, Line 4, Line 5,
Line 6 or all lines (
Any)
. If you select
Any
, the signal is set on the TTL
Pin as soon as one of the lines is switched to Pretalk.
–
Ringing/Connected State:
Toggeling of voltage when a call is coming
in (e.g. for flashing light). When the connection is established, the TTL
Pin is set.
–
Called Number:
–
Information Base Entry:
Special function for projects.
–
Any System Alarm Pending:
This function signals any system alarm.
–
Application Alarm Pending:
If you enable this function, you can select
under
Alarm
which Application Alarm you want to signal.
–
DTMF Digit Received:
–
ON AIR by Terminal:
If you select the option
Inverted,
which is displayed next to the function code,
the inverted signal is transmitted.
Relay
The following description applies for the configuration windows
Relay 1
,
Re-
lay 2, Relay 3 and Relay 4
.
ATTENTION Please pay attention to the maximum switch current of 200 mA respectively
the maximum switch voltage of 48V per relay output.
!