www.avonic.eu
7
IR Remote Controller
1.
Standby Button
Press this button to enter standby mode.
Press it again to enter normal mode. (Note:
Power consumption in standby mode is
approximately half of the normal mode)
2.
Position Buttons
To set preset or call preset
3.
*Button
Used with other buttons
4.
Set/Preset Buttons
Set preset: Store a preset position
[SET PRESET] + Numeric button (0-9): Setting
a corresponding numeric key preset
position
5.
Pan-Tilt control Buttons
Pressing the Pan-Tilt back to the middle
position
6.
Back buttons
Press the OSD menu return to the superior.
7.
Zoom Buttons
Slow Zoom: Zoom In [+] or Zoom Out [-]
slowly
Fast Zoom: Zoom In [+] or Zoom Out [-] fast
8.
8. Pan-Tilt L/R set
Press with 1 buttons and 2 buttons setting
the direction of the Pan-Tilt
L/R Set +1[STD]: set the Pan-Tilt turn the same
direction as the L/R Set
L/R Set +2[REV]: set the Pan-Tilt turn the opposite direction as the L/R Set
9.
9. Focus Buttons
Used for focus adjustment.
Press [AUTO] adjust the focuses on the center of the object automatically. To adjust the
focus manually. Press [MANUAL] adjust the focus on the center of the object manual
MANUAL button, and adjust it with [Far] (Focus on far object) and [NEAR] (Focus on near
object)
10.
Camera Select Buttons
Press the button corresponding to the camera you want to operate with the remote
controller.
11.
# Button
Used with other buttons
Set Camera IR Address Buttons
[*]+[
＃
]+[F1]: Address1
