www.avonic.eu
17
Restore: Confirm restore factory settings.
Optional items: Yes, No
Note: Press [HOME] button to confirm, All
parameter restore default, Include IR Remote
address and VISICA Address
Save: Save Options. Optional items: Yes, No
Serial Communication Control
COM port settings
In default working mode, the camera is able to connect to a VISCA controller with RS232C serial
interface.
RS232 Communication Control:
The camera can be controlled via RS232 ,the parameters of RS232C are as follows:
•
Baud rate: 2400/4800/9600 bit/s.
•
Start bit: 1 bit.
•
Data bit: 8 bits.
•
Stop bit: 1bit.
•
Parity bit: none.
RS485 Communication Control:
The camera can be controlled via RS485, Half-duplex mode:
•
Baud rate: 2400/4800/9600 bit/s.
•
Start bit: 1 bit.
•
Data bit: 8 bits.
•
Stop bit: 1bit.
•
Parity bit: none.
Pan-Tilt will rotate to the maximum position of top right after the camera started, then it return
to the center, the process of initialization is finished. (Note: If the position preset 0 has been
RESTORE DEFAULT
Restore?
No
Change Value
[Home] OK
[Menu] Back
