www.avonic.eu
28
Port Settings
HTTP Port
IP address identifies the network device, the device can run multiple web applications, each
network program using network port to transmit data, so data transmission to be carried out
between the port and port. Port setting is to set up WEB SERVER program using which port to
transmit. When port mapping, need to be consistent with the port number(default port: 80)
RTSP Port
IP camera support RTSP protocol, use the VLC tools broadcast.
PTZ Port
Support PTZ protocol, default port: 5678.
Control Protocol Setting
Setting camera control communication protocol, include Visca address, Pelco-D address,
Pelco-P address.
RTMP Setting
Setting the camera stream, can set up two stream, in the two stream selection control code
stream of "On", "Off", "Video", "Audio", etc.
RTSP Setting
Setting IP camera RTST protocol of "On", "Off".
ONVIF Setting
Setting the ONVIF protocol and ONVIF authorization "On", "Off".
Multicast Setting
Setting multicast "On", "Off", and multicast address (default address 224.1.2.3) and port
(default 6688)
Apply / Cancel
Modify network parameters then press "Apply" button to modify network parameters, press
"Cancel" button to cancel network parameters. A reboot is necessary to let the changes take
effect. Go to the System menu and press Reboot button.
RTSP stream media player
rtsp://ip: port number/1 (First stream);
rtsp://ip: port number/2 (Second stream).
RTSP port number default 554.
IP Port parameters
HTTP Port range
: 80; 1024-65535 (default 80)
RTSP Port range
: 554; 1024-65535 (default 554)
PTZ Port range
: 1024-65535 (default 5678)
Multicast Port range : 1024-65535 (default 6688)
Device Information
Show the current device information, as shown below.
