STEERING CABLE INSPECTION
•
Check the smooth operation of the steering wheel and steering nozzle.
•
Turn the steering wheel from
lock to lock and check that the
clearances between the
steering nozzle and the hull are
even on both right and left
sides.
•
A must equal B
•
If the steering is stiff or mis-
adjusted, ask your dealer to
service it.
SHIFT CABLE MECHANISM, INSPECTION & ADJUSTMENT
•
Place the throttle lever in the "Reverse" position, so that the reverse gate of the jet
pump is down to its stopper position. Turn the steering wheel fully to the port (left)
side.
•
At this position, the clearance between the pin and the pin slot end of the shift rod
lever should be 2 mm (0.08 in). If not, adjust it by turning the connector on the
back of the control cable.
1.
Pin.
2.
Shift rod lever.
39
A
B
1
2
2 m m (0.08 in)
