BENCH SEAT STOWAGE
1.
Bench seat cushion.
2.
Bench back cushion.
3.
Locating studs.
4.
Pull straps.
5.
Stowage space (also battery and
master switch).
BILGE PUMP
1.
The boat is equipped with an
emergency bilge pump to
remove water from the bilge in
the event of the engine
compartment flooding. The
emergency bilge pump is
operated from a switch on the
starboard side of the engine
compartment. This
switch/button must be pressed
and held for the pump to
operate.
NOTE :
The boat is also equipped with an automatic bilge draining device
that will remove water from the engine compartment while you are
underway. This will not operate while the boat is out of the water or
stationary.
Excessive water in the engine compartment bilge can splash into the carburettor and
engine. This could cause engine damage. If there is any water in the bilge, switch on
the bilge pump until the water has drained.
BILGE DRAIN PLUGS
1.
The hull drain plug is a screw fit
into the flange. Turn anti-
clockwise to undo and clockwise
to tighten.
2.
The flange is fitted to the hull at
the stern.
3.
Hull moulding
NOTE :
Hull drain plugs should only be removed when the boat is out of the
water. After all water has drained wipe the bilge with a dry rag.
Clean any foreign material, such as dirt or sand, from the threads
before installing the drain plugs.
22
3
1
2
1
2
3
5
4
4
