Avocent AutoView 3050, Инструкция по установке и эксплуатации, Страница: 45 / 102

Chapter 3: Local Port Operation
33
Enabling or disabling Scan mode
To start the Scan mode:
1. If the OSCAR interface is not open, press
Print Screen
to open the Main dialog box.
2. Click Commands to open the Commands dialog box.
3. Select Scan Enable in the Commands dialog box.
4. Click X to close the Commands dialog box.
NOTE: Scanning will begin as soon as the Scan Enable button is selected.
To cancel Scan mode:
Select a target device if the OSCAR interface is open.
-or-
Move the mouse or press any key on the keyboard if the OSCAR interface is not open. Scanning
will stop at the currently selected target device.
-or-
From the Commands dialog box, deselect the Scan Enable checkbox.
Viewing and disconnecting user connections
You can view and disconnect users through the User Status dialog box. The username (U) will
always be displayed; however, you can display either the target device name or EID number to
which a user is connected. If there is no user currently connected to a channel, the user field will be
blank and the Server Name field will display Free.
To view current user connections:
1. If the OSCAR interface is not open, press
Print Screen
to open the Main dialog box.
2. Click Commands - User Status to open the User Status dialog box shown in Figure 3.17.