Version 1.0
Page 5
1 Introduction
The UltraZed
™-EG SOM (System-On Module) is a low cost System-On-Module targeted for broad use in
many applications. The features provided by the UltraZed-EG System-On-Module consist of:
Xilinx XCZU3EG-1SFVA625 MPSoC
o
Pin Compatible with the 2EG, 2CG, and 3CG MPSoC devices in the same package
o
Primary configuration Options = eMMC or QSPI Flash
o
Auxiliary primary configuration options via End User Carrier Card
JTAG
microSD Card
Memory
o
DDR4 SDRAM (2GB, x32)
o
Dual QSPI Flash (64MB)
o
eMMC Flash (8GB, x8)
o
I2C EEPROM (2Kb)
Interfaces
o
Gigabit Ethernet PHY (Connector required on End User Carrier Card)
o
USB 2.0 ULPI PHY (Connector required on End User Carrier Card)
o
One 100-pin JX Micro Header
o
Two 140-pin JX Micro Headers
o
I2C I/O Expander
o
Two Channel I2C Switch/MUX
PS Reference Clock Input
o
33.333 MHz OSC
Power
o
On-Board 5-Output Voltage Regulators
o
Full Power Sequencing Pre-Programmed
o
Support for Zynq Ult® PS Low Power Mode
o
Bank I/O Voltage Rails and GTR Transceiver Voltage Rails are powered from End User
Carrier Card via JX Micro Headers
Pertinent URLs
o
SOM: http://ultrazed.org/product/ultrazed-EG
o
Starter Kit: http://ultrazed.org/product/ultrazed-eg-starter-kit
o
Carrier Card: http://ultrazed.org/product/ultrazed-io-carrier-card
Figure 1
– UltraZed-EG SOM 3D Views
