Avnet COM Express MSC C10M-BT Скачать руководство пользователя страница 89

Страница: 89 / 90

MSC C10M-BT / MSC C10M-BTC

User Manual

89 / 90

2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3. Neither the name(s) of the above-listed copyright holder(s) nor the

names of its contributors may be used to endorse or promote products

derived from this software without specific prior written permission.

==============

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT

OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

======================================================================

Features

--------

Internal crypto implementation (optional):

- X.509 certificate processing in PEM and DER formats

- PKCS #1

- ASN.1

- RSA

- bignum

- minimal size (ca. 50 kB binary, parts of which are already needed for WPA;

TLSv1/X.509/ASN.1/RSA/bignum parts are about 25 kB on x86)

Requirements

------------

wpa_supplicant was designed to be portable for different drivers and

operating systems. Hopefully, support for more wlan cards and OSes will be

added in the future. See developer's documentation

(http://hostap.epitest.fi/wpa_supplicant/devel/) for more information about the

design of wpa_supplicant and porting to other drivers. One main goal

is to add full WPA/WPA2 support to Linux wireless extensions to allow

new drivers to be supported without having to implement new

driver-specific interface code in wpa_supplicant.

WPA

Содержание COM Express MSC C10M-BT



























































































Результаты поиска

Содержание COM Express MSC C10M-BT

Отзывы:

Похожие инструкции для COM Express MSC C10M-BT

Бренды по названию

Популярные бренды

Avnet COM Express MSC C10M-BT, Руководство пользователя

Результаты поиска

Содержание COM Express MSC C10M-BT

Отзывы:

Похожие инструкции для COM Express MSC C10M-BT

Бренды по названию

Популярные бренды