FRITZ!Box
95
Configuration and Operation by Telephone
12
Configuration and Operation by Telephone
Many of the FRITZ!Box functions and features can be config-
ured and used over a telephone connected to a FRITZ!Box
extension. Only tone-dialing (dual-tone multifrequency =
DTMF) telephones can be used in configuration and opera-
tion. Pulse dialing telephones are not suitable.
The telephone network features can be used only if they are
supported by your telephone network carrier and enabled
on your telephone line.
Entries input on the telephone are confirmed with an ac-
knowledgement tone. Entries made correctly are confirmed
with a positive acknowledgement tone (a single tone of one
second in length). An error, such as an incorrect key se-
quence, is indicated by a failure tone, an intermittent tone
at intervals of about 0.25 seconds.
For more information on the audio signals, see the section
“Audible Signals” on page 134.
Designation of the Functions and Features
Functions and features whose application has direct effects
on the connection are marked with icons. The icons indi-
cate the connection types with which the function or fea-
ture can be used or applied.
Functions and features that have no effect on the connec-
tion are not marked.
An overview of all of the icons used in this chapter is pre-
sented in the section “Symbols and Highlighting” from
page 7 of this manual.
F!BoxFonWLAN-7170v2-e.book Seite 95 Freitag, 23. November 2007 3:41 15
