FRITZ!Box
37
Configuring Analog Equipment
If the connected terminal devices are to react only to certain
numbers, numbers must be assigned to the extensions.
The number defined as “Number of the extension” also de-
fines whether calls from this extension will be conducted
using the fixed-line network or the Internet.
To do this, perform the following steps:
1.
Start a web browser.
2.
Enter
fritz.box
in the address field.
3.
Select the “Settings” menu.
4.
Click the “Extensions” command in the “Telephony”
menu.
5.
On the “Overview” page, click the button next to the
number of the extension to change its properties.
6.
If the terminal equipment is to react only to the speci-
fied number, remove the checkmark from the check-
box “React to all numbers”.
7.
Select the desired number from the “Number of the
extension drop-down menu”.
The device connected to the “FON 1” extension reacts
to incoming calls placed to this number and uses the
kind of connection specified for outgoing connections
with this number.
8.
If you would like to assign additional numbers to the
extension, select from the “Additional numbers” drop-
down menus any other numbers the device at the
“FON 1” line should react to for incoming calls.
9.
Click the “Apply” button.
10.
If desired, set up the “Extension FON 2” and the “Ex-
tension FON 3” in the same manner.
F!BoxFonWLAN-7170v2-e.book Seite 37 Freitag, 23. November 2007 3:41 15
